What’s going on if the temperature of peanut sheller components rising?

During the use of peanut sheller, the temperature of components of the machine sometimes rises. If this phenomenon occurs, we must pay attention to it. If the problem is not solved in time, the parts will often be damaged.

The working temperature of the motor of peanut shelling machine should not exceed 60 degrees Celsius. If it is found that the motor temperature is too high, it is necessary to immediately stop and check the circuit to ensure that the voltage reaches or approaches 380v, and the 2-phase motor needs to reach 220v.

The bearing temperature should not exceed 25 degrees Celsius. If the bearing seat temperature is found to be too high, stop the machine immediately to check whether the bearing is damaged or whether the voltage is within the working range, so as to avoid greater losses.

Peanut shelling machine is driven by V-belt. After a period of use, the belt will gradually become slack under the action of tension, so it needs to be adjusted according to the actual situation, such as adjusting the wire drawing and tension wheel, or replacing a new belt.

As a manufacturer specializing in peanut machinery, KMEC can provide you with reliable peanut machinery, and you can also enjoy our complete after-sales service. If you need to buy peanut machinery, whether it is peanut shelling machine, peanut peeling machine, peanut roasting machine or peanut butter machine, please contact us!